Welcome

1. Conduct roof measurement
2. Prepare estimate
3. Sign contract
4. Schedule material delivery

1. Set out tarps to protect house and landscaping
2. Remove any yard ornaments, grills, potted plants, etc. away from the home
3. Set toe boards and take necessary safety precautions for roof traffic
4. Tear-off roof starting at ridges
5. Begin clean up of debris on tarp

1. Replace any rotted, leaky sheets of plywood
2. Install ice and water shield in valleys, eaves, roofing vents, and vulnerable areas
3. Install roofing felt
4. Chalk lines for keeping shingle rows straight, in addition to chalking lines for starter strip to ensure proper overhang
5. Begin carrying up bundles of shingles
6. Install vent boots
7. Install starter strip
8. Install shingles
9. Install any step and/or counter flashing
10. Install any ridge vent
11. Install ridge capping

1. All throughout replacement, debris cleanup will occur
2. Throw all shingles, felt, and nails in dumpster, dump trailer etc
3. Bag all plastic, paper, or plastic bottles or aluminum cans
4. Roll roofing magnets all throughout yard to pick up all nails
5. Carefully examine property for any left-over debris
6. Load up any remaining materials

It is not recommended to roof over your existing roof. In some cases, homeowners make prefer this route because it is cheaper, but it can prove to be less cost effective over time. If you have two layers of shingles on your home, how do you find the source of the leak? If it’s not in an obvious location such as a valley or vent boot penetration, it can be very tough to find. Water could leak through the first layer, and then find its way to the roof sheathing further down the slope. This is what makes it difficult to pinpoint the exact source on multiple layers of shingles.

There’s also the fact that the roof is going to absorb more heat. This can lead to higher energy bills to control cooling during the warm months of the year.

The maximum amount of shingle layers is two layers. Even at two layers, this is a considerable amount of weight, and again this leads to higher energy bills to control heating/cooling.

This strip does not need to be removed. The strip is there to help keep the shingles from sticking together within the bundles they are packaged in. The shingle still seals with the strip on them.

No. Staples should never be used to install asphalt shingles.

High temperatures in the summer can have their effect on a roof replacement. Very high temperatures can lead to an increase in the risk of exhaustion or dehydration for employees.  The darker the roof, the more the roof absorbs the heat, which tends to radiate at the surface of the roof.  These high temperatures can directly affect the shingles as well.  3-Tab (25-Year Shingles) are thinner than Architectural (30-Year Shingles), and once heated, the granulars have a greater risk of coming loose.  For instance, the granulars tend to slide at high temperatures, because there is a decrease in adhesion between the granular and asphalt. The 3-Tab will tend to “scar” when walked on at very high temperatures, especially on very steep roofs, since more traction is required for one to walk on.  Therefore in the summer months, roofing crews will tend to start as early as possible, then break during the peak temperatures of the day (approximately 12pm-3pm).  This break allows the shingle temperature to drop, and also prevents workers from suffering from exhaustion or dehydration.

There are no minimum requirements for temperature when installing shingles.  Shingles can become brittle and crack at low temperatures (especially when bending for valleys etc).  Sealing strips may also be slow to seal, as it takes heat for the make the seal.  The risk is that high winds get beneath shingles prior to them sealing, which could lead to shingles being damaged or blown off the roof.

Every roof replacement is different based on a number of factors.

How many people are on the roofing crew?

How big or small is the roof?

How steep?

How many roof penetrations?

How much flashing is required for end walls, chimneys, dormers, etc.?

How many valleys does the roof have?

Will ridge vent need to be cut in?

What type of access is there around the property?

These are all factors that can have a direct impact on the installation time.  The best case scenario is that a roof is removed and replaced in one day.  This eliminates the risk of harsh weather overnight.  Some jobs may take multiple days. In these cases, contractors prefer to work small sections of the roof, rather than tearing off the whole roof and leaving areas exposed over night.  In the event that bad weather unexpectedly makes it’s way into the area, contractors should be prepared to quickly cover the exposed areas with tarps to prevent water infiltration.

As a company we prefer to assign our roofing crews to jobs based on the size of the roof.  Our preference is to perform our replacements in one day.

We have seen a growing trend in the number of calls from realtors, in relation to roof inspections for storm damage.  As the general public has become more educated on roof damage with the hail storms over the last few years, more buyers are taking this into consideration when negotiating price.  A new roof can provide extra re-sale value by assuring buyers that they are not going to have to spend thousands of dollars on a new roof after purchasing the home. This serves as a nice selling point, giving the buyer an added peace of mind, and one less excuse not to buy.  We recommend having the roof inspected prior to selling, in case there is storm damage which could be covered by insurance.  As mentioned, we have noticed this as a growing trend as of late.

One of the most important questions for most homeowners is what the cost will be for a new roof. There are many factors involved, and no two roofs can be priced the same. Here’s a list of many of the factors that go into an estimate for a new roof.

Is this a replacement or a newly constructed roof? If it is a replacement and the existing layers need to be torn off, there will be higher labor costs associated with the replacement versus new construction which only requires installation of the shingles, and no tear-off.

What sort of materials are you using? There is a considerable price difference between a 20-year shingle and a 50-year shingle. There are many ranges of shingles based on the life, cosmetic appearance of the shingle, shading (some have more color definition), etc. Labor costs are generally the same despite what shingle material is used. Material costs do vary based on the type of roof, ie shingle, metal, or rubber.

Is the old roof being removed, or will it be laid over? As a company, we strongly urge customers not to perform lay-over roofs. If a leak occurs with two layers (or more), finding the leak will be a difficult task. Is it coming from the first layer or second layer? Is it working it’s way down the transition between the shingles? Down the ceiling rafter? With multiple roofs, labor costs go up quite bit because there is an increase in the amount of tear-off labor. (Essentially tearing two roofs off versus one, twice as much waste meaning an increase in dump fees, an increase in clean-up time, etc.)

What will be going under the shingles? There are different types of felt and there is also ice and water protection membrane. Ice and water protection membranes are used in valleys, high slope to low slope transition areas, eaves, and any other places where water may have the potential to work its way beneath the shingles. Ice and water protection serves a major purpose in protecting the underside of the shingles when ice damming occurs.

1. Customer calls roofing contractor to inspect for wind or hail damage.
2. Contractor either finds damage or does not find damage.
3. In the event damage is found, contractor may recommend homeowner to contact insurance company.
4. Insurance adjuster comes out for inspection. At this point you want your roofing contractor present to discuss their findings.
5. Those adjusters that work directly for the insurance companies have the ability to make decision on spot. Independent adjusters (subcontractors), cannot make the decision on the spot.

1. Insurance company will mail/email homeowner claim information.
2. First check will be issued prior to work being completed.
3. Homeowner will select contractor and complete work.
4. Once work is completed, certificate of completion/final invoice signed by homeowner and contractor is sent to insurance company.
5. Insurance company releases second check, which pays the remaining amount on the final invoice, which the first check did not cover.
6. Homeowner deposits checks from insurance company into personal account, then pays contractor amount on certificate of completion/final invoice.

Yes, we provide FREE detailed inspection.  

At Falcon Roofing of the Carolinas, we understand that navigating the insurance process can be confusing and overwhelming for homeowners. That's why we're here to help. Our team of experienced professionals has extensive experience working with insurance companies to ensure that our clients receive the coverage they need to repair or replace their roofs.

We can help you navigate the insurance claims process from start to finish, including providing a thorough inspection and documentation of the damage, communicating with your insurance adjuster, and advocating on your behalf to ensure that you receive a fair and timely settlement. We can also work with your insurance company to make sure that all of the necessary repairs are covered under your policy.

Our goal is to make the insurance claims process as easy and stress-free as possible for our clients. We understand that dealing with insurance companies can be a daunting task, which is why we're here to help you every step of the way. If you need assistance with your insurance claim, don't hesitate to contact us. We'll work with you to ensure that you receive the coverage you need to repair or replace your roof.

 Most common source of problems:

1. Lack of Maintenance
2. Weathering
3. Wind Damage
4. Hail Damage
5. Improper Design

 We provide roofing estimates free of charge.